 |
|
Recent Publications (1998-2005)
"Examination of the Material Removal Mechanisms During the Lapping Process
of Advanced Ceramic Rolling
Elements"
J Kang and M Hadfield
Wear Journal, Vol 258 pp.2-12, 2005
'Residual stress variations during rolling contact fatigue of refrigerant lubricated
silicon nitride bearing elements'
Khan, Z., M. Hadfield, S. Tobe, Y. Wang
Ceramics International, In press, 2005
'Pressurised chamber design for conducting rolling contact experiments with
liquid refrigerant lubrication'
Zulfiqar Ahmad Khan , Mark Hadfield and Ying Wang
Materials & Design, Vol.26 pp680-689, 2005
'Ceramic rolling elements with ring crack defects - a residual stress approach'
Zulfiqar Ahmad Khan , Mark Hadfield, S. Tobe and Ying Wang
Materials Science and Engineering A, Vol.404 pp221-226, 2005
'The effect of lapping load in finishing advanced ceramic balls on a novel
eccentric lapping machine'
J. Kang and M. Hadfield
Proc. IMechE Vol 219Part B: J. Engineering Manufacture pp505-513, 2005
'The polishing process of advanced ceramic balls using a novel eccentric lapping
machine'
J. Kang and M. Hadfield
Proc. IMechE Vol 219Part B: J. Engineering Manufacture pp493-504, 2005
'Environmental implications of hydrocarbon refrigerants applied to the hermetic
compressor'
N. P. Garland and M. Hadfield
Materials and Design, Vol. 26, pp578-586, 2005
'Tribological analysis of hydrocarbon refrigerants applied to the hermetic
compressor'
N. P. Garland and M. Hadfield
Tribology International, Vol. 38, pp732-739, 2005
'Subsurface propagation of partial ring cracks in rolling contact: Part I,
experimental studies'
P. Zhao, M. Hadfield, Y. Wang and C. Viellard
Wear Journal, In press 2005
'Subsurface propagation of partial ring cracks in rolling contact: Part II,
fracture mechanics analysis'
P. Zhao, M. Hadfield, Y. Wang and C. Viellard
Wear Journal, In press 2005
'The influence of test lubricants on the rolling contact fatigue failure mechanisms
of silicon nitride ceramic'
P Zhao, M Hadfield, Y Wang and C Vieillard
Wear, Vol. 257, pp.1047-1057, 2004
'Failure modes of ceramic rolling elements
with surface crack defects'
Y Wang and M Hadfield
Wear, Vol. 256, pp.208-219, 2004
'A study of tribological durability with associated environmental impacts of
a domestic refrigerator"
C Ciantar, M. Hadfield
Materials & Design
Vol. 25 331-341, 2004
'Design of a Novel Pressurized Chamber to Assess in-use Durability Performance
of Rolling Contact Elements Using Refrigerant Lubrication'
Khan, Z., M. Hadfield, Y. Wang,
4th Intl. Conf. Advanced Engineering Design, ISBN 80-86059-41-3 (C3.01), 2004
Glasgow, Scotland, UK.
'Design and Finite Element Analysis of a Novel Pressurised Chamber to Conduct
Rolling Contact Experiments using Refrigerant Lubrication'
Khan, Z., M. Hadfield (2004). Presentation at Britain's Top Younger Scientists,
Engineers and Technologist at the House of Commons 15 Sept 2004. ref. L2-8
'A mechanism for nucleating secondary
fractures near a preexisting flaw subjected to contact loading'
Y Wang and M Hadfield
Wear, Vol. 254, pp.597-605, 2003
'The effects of material combination and surface roughness in lubricated silicon
nitride/steel rolling contact fatigue'
J. Kang, M. Hadfield and R. Ahmed
Materials & Design, Volume 24, Issue 1, February 2003, pp1-13.
"Comparison of 4-ball and 5-ball rolling contact fatigue tests on lubricated
Si3N4/steel contact"
J. Kang and M. Hadfield
Materials and Design Journal
Vol. 24, pp. 595-604, 2003
"Educational Challenges for Interactive Wed-Based Sustainable Development
Learning"
M. Hutchings, M. Hadfield, G. Howarth and S. Lewarne
Active Learning in Higher Education
Submitted June 2003
"The challenges of introducing sustainable development principles into
product design teaching"
G. Howarth and M. Hadfield
Ethics in Engineering Design, Proceedings IED International Conference,
Bournemouth, 10-11th September2003
pp. 35-42. ISBN 1 86058 413 6
"Sustainable Product Development Thinking and Assessment - A Practical
Approach
G Howard and M. Hadfield
Design and Manufacturing for Sustainable Development
2nd International Conference, Cambridge, September 2003
PEP Publications, ISBN
"Wear mapping to optimise overlay coating design in rolling silding contacts"
R. Ahmed and M. Hadfield
Tribology in Environmental Design 2003, Professional
Engineering Publishing Ltd., London, pp. 59-70, 2003.
ISBN: 1-86058-415-2
"Investigating the environmental impact that issues of tribology have on
the use phase of a domestic
refrigerator"
C. Ciantar, V Magri and M. Hadfield
Tribology in Environmental Design 2003, Professional
Engineering Publishing Ltd., London, pp. 85-95, 2003.
ISBN: 1-86058-415-2
"In-use tribological analysis of hydrocarbon refrigerants applied to the
hermetic compressor"
N P Garland and M Hadfield
Tribology in Environmental Design 2003, Professional
Engineering Publishing Ltd., London, pp. 193-203, 2003.
ISBN: 1-86058-415-2
"Experimental investigation of lubricated surface ring crack fatigue in
rolling contact"
P Zhao, M Hadfield, Y Wang, C Viellard, R Cundill and S Ioannides
Tribology in Environmental Design 2003, Professional
Engineering Publishing Ltd., London, pp. 301-310, 2003.
ISBN: 1-86058-415-2
"Rolling wear of silicon nitride bearing material in a simulated refrigerant
environment using a novel
pressurised chamber"
Z Khan, M Hadfield and Y Wang
Tribology in Environmental Design 2003, Professional
Engineering Publishing Ltd., London, pp. 337-346, 2003.
ISBN: 1-86058-415-2
"Proceedings of the Second International Conference on Tribology in Environmental
Design"
Editors: M Hadfield and Y Wang
Professional Engineering Publishing Ltd., London, 2003, ISBN: 1-86058-415-2
'Mechanisms of fatigue failure in thermal spray coating'
R Ahmed and M Hadfield
Journal of Thermal Spray Technology, Vol 11(3), pp 333-349, 2002
"Residual stress measurements of HIPed silicon nitride rolling elements",
Kang, J., Hadfield, M. and. Tobe S.
Ceramics International 28 (2002) 645-650.
'A study of line defect fatigue failure
of ceramic rolling elements in rolling contact'
Y Wang and M Hadfield
Wear, Vol 253, pp 975-985, 2002
"The Influence of natural surface defects on rolling contact fatigue failure
modes of HIPed Si3N4",
Kang, J. and Hadfield, M.,
Industrial Ceramics,Vol. 22, 2002, No. 3, 121-128.
' Life prediction for surface crack initiated contact fatigue of silicon nitride
bearing balls',
Y. Wang and M. Hadfield
29th Leeds-Lyon Symposium, Leeds, 2002
'Surface quality and reliability of HIPed Si3N4 rolling elements',
Kang, J. and Hadfield, M.,
The 3rd International Conference on Quality and Reliability, Australia 2002
'Rolling contact fatigue of ceramics'
Y Wang and M Hadfield
American Society of Testing Materials ASM, 2002
ASM-Handbook, Volume-11 Section 6E
"Educational challenges of web-based studies in sustainable development
M. Hutchings, S. Lewarne, K. Norman, N. Garland, M. Hadfield and G Howard
Design and Manufacturing for Sustainable Development
1st International Conference, Liverpool, June 2002
PEP Publications, ISBN 1 86058 396 2
"Surface quality and reliability of HIPed Si3N4 rolling elements"
Kang, J. and Hadfield, M.,
3rd International Conference on Quality and Reliability,
Melbourne 2002.
"Life predication for surface crack initiated contact fatigue of silicon
nitride bearing balls"
Y. Wang and M. Hadfield
Leeds/Lyon International Conference
Leeds, September 2002
"Sustainable development training & educational challenges for business
& universities"
M. Hadfield and G. Howarth
International Conference: Engineering Education in Sustainable Design
Delft, The Netherlands. 24-45 October 2002,
pp 174- 182. ISBN 90-5638-099-0
"An assessment model for sustainable product development"
G. Howarth and M. Hadfield
International Conference: TSPD7 Managing Sustainable Products
London, 28-29th October 2002,
pp. 147-157. ISBN 0-9543950-0-X
"Parameter Optimisation by Taguchi Methods for Finishing Advanced Ceramic
Balls Using a Novel Eccentric Lapping Machine"
J. Kang and M. Hadfield
Journal of Engineering Manufacture Part 'B' - Proceedings of the Institution
of Mechanical Engineers, Vol. 215, pp 69 - 78, 2001
"A Novel Eccentric Lapping Machine for Finishing Advanced Ceramic Balls"
J. Kang and M. Hadfield
Journal of Engineering Manufacture Part 'B' - Proceedings of the Institution
of Mechanical Engineers, Vol. 215, pp. 781 - 795, 2001
"Rolling Contact Fatigue Performance of HIP'ed Si3N4 with Different Surface
Roughness"
J. Kang and M. Hadfield
Ceramics International, Vol. 27, pp 781-794, 2001
"Ring crack propagation in silicon
nitride under rolling contact"
Y. Wang and M. Hadfield
Wear, Vol. 250/1, pp. 283-293, 2001
"Case studies to assist integrating waste prevention in product design"
C. Ciantar, M. Hadfield, G. Howarth
Engineering for Profit from Waste V1
International Conference, IMechE, London, 13-14 November 2001.
"The Influence Of In-Homogenous Porosity On Silicon Nitride/Steel Failure
In Lubricated Rolling Contact"
J. Kang and M. Hadfield
Ceramics International, Vol. 26, pp 315-324, 2000
"The influence of POE and PVE lubricant blends within hermetic refrigerating
compressors operating with HFC-134a refrigerant"
C. Ciantar, M. Hadfield, A.M. Smith (Castrol International) and A. Swallow (Castrol
International)
Wear, Vol. 241, pp. 53-61, 2000
"An Environmental Evaluation of Mechanical Systems using Environmentally
Acceptable Refrigerants"
C. Ciantar and M. Hadfield
Journal of Life Cycle Assessment, Vol. 5, No. 4, pp. 209-220, 2000
"Factors Affecting the Sustainable Development in Domestic Refrigerators"
C. Ciantar and M. Hadfield
International Appliance Manufacturing 2000, Vol. 4 pp.209-220, 2000
"The influence of ring crack location
on the rolling contact fatigue failure of lubricated silicon nitride: experimental
studies"
Y. Wang and M. Hadfield
Wear, Vol. 243, pp. 157-166, 2000
"The influence of ring crack location
on the rolling contact fatigue failure of lubricated silicon nitride: fracture
mechanics analysis"
Y. Wang and M. Hadfield
Wear, Vol. 243, pp. 167-174, 2000
"Environmental consequences of tribological issues in mechanical systems
using replacement
refrigerants"
Ciantar, C. and Hadfield, M
Proceedings of the First International Conference on Tribology
in Environment Design 2000,
Professional Engineering Publishing, Bournemouth (UK), ISBN: 1-86058-266-4
2000, pp. 100-110
"The consequences of aggressive lapping processes on the surface integrity
of HIP'ed silicon nitride bearing balls"
J. Kang, M. Hadfield and R. Cundill,
Tribology in Environmental Design 2000, Professional Engineering Publishing
Ltd., London,
ISBN: 1-86058-266-4, 2000, pp. 227-234
"Boundary element analysis of surface ring crack in silicon nitride bearing
elements"
Y.Wang and M. Hadfield
Tribology in Environmental Design 2000, Professional Engineering Publishing
Ltd., London,
ISBN: 1-86058-266-4, 2000, pp. 297-304
"HVOF coatings to combat fatigue -the quest continues"
R. Ahmed, M. Hadfield and S. Tobe
Tribology in Environmental Design 2000, Professional
Engineering Publishing Ltd., London, pp. 121-128, 2000.
ISBN: 1-86058-266-4
"Proceedings of the first international conference on tribology in environmental
design"
Editors: M Hadfield and C. Ciantar
Professional Engineering Publishing, ISBN: 1-86058-266-4
Bournemouth (UK), September 2000.
Publications
1999
"Rolling Contact Fatigue Failure Modes of Lubricated Silicon Nitride in
Relation to Ring Crack Defects"
Y. Wang and M. Hadfield
Wear, Vol. 225-229, pp 1284-1292, 1999
"Failure Modes of Plasma Sprayed WC-15% Co Coated Rolling Elements"
R. Ahmed (Cambridge University) and M. Hadfield
Wear, Vol.230, pp 39-55, 1999
"The Influence of Oil Viscosity on Compressor Components in HFC-134a Environments"
C. Ciantar, M. Hadfield, A.M. Smith (Castrol International) and A. Swallow (Castrol
International)
Wear Journal
Vol. 236, pp. 1-8, 1999
"Rolling Contact Failure Modes of Lubricated Silicon Nitride in Relation
to Surface Defects"
J. Kang and M. Hadfield
9th World Ceramics Congress & Forum on New Materials, Italy, June 1998
Presented at Conference and published (refereed), Ceramics: Getting into the
2000's, ISBN: 88-86538-14-6, pp533-540, TECHNA Srl, 1999
"Investigating The Sustainable Development Of Domestic Refrigerating Systems
Working In An HFC-134a Environment"
C Ciantar and M Hadfield
Recent Developments in Refrigeration and Heat Pump Technologies
IMechE Seminar Publication 1999-10, pp47-59
Published by Professional Engineering Publishing Ltd, London ISBN 1 86058 238
9
"A Study on the Lapping of Ceramic Balls"
J. Kang and M. Hadfield
Fourth International Conference on Computer Methods and Experimental
Measurements for Surface Treatment Effects - SURFACE TREATMENT 99
Computational Mechanics Publications, Southampton (UK)
pp. 389-399, 1999, ISBN 1-85312-697-7
"Life Cycle Consequences of Domestic Refrigerating Systems Working in
an HFC-134a Environment"
C Ciantar and M Hadfield
International Conference on Engineering Design, ICED'99: Munich, 1999
Published by Techische Universität München, Germany
ISBN 3-922979-53-X, Vol. 1, pp. 269-272, 1999
"Failure of Silicon Nitride Rolling Elements with Ring Crack Defects"
M. Hadfield
Ceramics International, Vol. 24, pp. 379-386, 1998
"Residual Stress Measurements of Silicon Nitride Rolling Elements"
M. Hadfield and S.Tobe (Ashikaga University).
Ceramics International, Vol. 24, pp. 387-392, 1998
"Wear Behaviour of the Piston/Gudgeon Pin in a Hermetic Compressor with
Replacement CFC Refrigerants"
S. Safari (Brunel University) and M. Hadfield
Wear, Vol. 219, pp.8-15, 1998
"Rolling Contact Fatigue Performance of Plasma Sprayed Coatings"
R. Ahmed (Cambridge University) and M. Hadfield
Wear, Vol. 220, pp. 80-91 1998
"Fatigue Behaviour of HVOF Coated M-50 Steel Rolling Elements"
R. Ahmed (Cambridge University) and M. Hadfield
Surface Engineering Journal - Institute of Materials
Vol. 14, No. 6, pp. 473-480, 1998
|
Overview |
|
|
Membership |
|
|
Activities |
|
Current Projects |
 |
Publications |
|
Education and Training |
|
Industrial Partnership and Consultancy |
|
Staff Opportunities |
|
News and Correspondence |
|
Links to Related Sites |